新闻动态
制作不同的模具主需要更换相应的钢模具就可以注塑机成为了整个生产过程中对主要的电缆槽钢模具的制作原来是根据塑料pp高温熔化低温冷却的原理来的我国生产的模具大部分都是电缆槽钢模具。水泥浆不足也会导致气泡产生。浆时不要一次性灌满需要注意的是水泥浆不易过稀。然后再太阳充足的地方晾干,就可以脱模了,生产出来水泥制品。对于模具的保养一定不要放在高温的环境下。
To make different molds, the main need to replace the corresponding steel mold, the injection molding machine has become the main cable channel mold in the whole production process. The production of the main cable channel steel mold was originally based on the principle of high temperature melting and low temperature cooling of plastic pp. most of the molds produced in China are cable channel steel molds. It can also lead to insufficient bubbles in cement slurry. Do not fill the slurry at one time. It should be noted that the cement slurry is not easy to be too thin. Then the sun is enough to dry, you can demould, produce cement products. For mold maintenance must not be placed in a high temperature environment.
电缆槽钢模具使用简单在每一次使用完模具后一定要涂油保养。然后经过震动平台只需要把搅拌好的水泥放入到模具里面。因此在模具生产过程中也限定了电缆槽钢模具的大规模生产采用高性能材料。
The cable channel steel mold is easy to use, and it must be oiled after each use. Then through the vibration platform, only need to put the mixed cement into the mold. Therefore, in the process of mold production, it is also limited to use high-performance materials in large-scale production of cable channel steel mold.

© 保定市清苑区大进模具加工厂  推荐产品:u型槽模具,电缆槽模具,水沟盖板模具等   网站制作: